Item Details
- Seller: R3VMATCH
- Location: Mesa, Arizona 85207
- Lot #: P-0031963
Available for auction is this set of highly sought-after 19" RUF wheels. This set includes five wheels in total, one rear being a replica. The wheels have general wear and tear (some scratches/chips/rash), but nothing major like bends or cracks. They all appear to bear their original finishes. This setup is well-suited for narrow-body 996 applications and potentially narrow-body 997 models as well (with the exception of 997 PCCBs, which they will not clear). These wheels may also be suitable for select cars from the 993 generation, offering versatility and compatibility across various Porsche models. Please confirm fitment on your vehicle before bidding. The buyer is responsible for shipping, handling, and fees.
Front Wheels:
8.5" x 19" ET56 (Genuine)
Rear Wheels:
11" x 19" ET67 (Replica)
11" x 19" ET70 (Genuine)
10" x 19" ET66 (Genuine)
Auction Results
- Sold for: $2,325
- Auction End: Jul 20, 2023 08:50:00PM UTC
- Number of Bids: 9
Comments (37)
Thanks @R3VMATCH I have a 911 millennium edition they're gonna look fantastic on
Fantastic auction! Thanks everyone for your participation!
Congratulations to @veelangs! Looking forward to seeing what you’ll put these on!
Sold for $2,325
Bid in the amount of $2,325
@Fortun3 thank you for the kind words!!
Buy with confidence. Legit seller. Bought a roll bar from him recently. Everything as described.
Bid in the amount of $2,300
@RockyMtnMotorcar the 19x8.5 part number is: R96 362 117 10
The 19x11 is: R96 362 121 10.
The 19x10 is: R96 362 1xx 10. (It’s too hard to decipher the couple digits in the casting in the back of the spoke (hence the “xx”), but that’s the closest to the full part number I can physically see.
Bid in the amount of $2,000
What are the RUF Part Numbers for the frt & rear Rims
Looking for the following numbers which are 19" 8.5 and 10" width
R93 300 360
R93 300 350
Bid in the amount of $1,750
Bid in the amount of $1,400
Bid in the amount of $1,250
Bid in the amount of $1,100
thanks, thats what I would assume but better to ask!
@veelangs the full diameter is right at 3” in diameter and the inner groove (the part that the center cap clips actually clip into is 2.25” in diameter. You can use OEM 996/997 Porsche center caps on these wheels.
Can you please measure the center cap size? thanks
@J4177 I weighed each one to get a rough idea. The replica 19x11 weighs 36.2 lbs, and the genuine 19x11 weighs 33.8 lbs. Slight weight difference, but not a wild variance, which is good!
Hi. Aside from the offset difference, what is the weight difference between the replica and genuine 11” rear wheels? Thanks
Good morning everyone! As the auction gets closer to the end, please feel to reach out if you have any questions. Happy bidding!
Bid in the amount of $1,000
Bid in the amount of $100
@Bruce914 yes, all 5 wheels are 5x130 lug pattern.
5x130?
Good morning everyone! Two short videos have been added to the listing. As always, please feel free to reach out with any questions and I’m happy to help. Bid with confidence! Excited to see these wheels find a perfect home.
@hughespt good morning! Yes, I can certainly package/box them and drop them at FedEx for you.
Are you able to safely package these wheels in preparation for shipping and drop them at a shipping point such as Fed Ex?
@joylove absolutely! I wanted to offer the set of 5 in the hopes that this gives some options for the new owner to do with the wheels as they wish. Options like finding an additional matching 10 wide rear wheel to have a full set of genuine wheels, or run the 11” wides in the rear and have the 10” wide wheel remain as a “spare” wheel, etc.
The replica wheel’s offset (one of the 11” wide wheels) is only 3mm different than the genuine one. It has a lower offset of 67mm, so it’ll sit 3mm further outward in comparison to the genuine 19x11” et70 wheel. Hardly a discernible difference, but you could either add a 3mm spacer to the other 19x11 et70 wheel to make them match; or I suppose you could have a wheel repair shop (or a shop that specializes in wheels) to machine 3mm of thickness off of the back pad of the replica wheel (and then it would match the other genuine 11” wide wheel identically, effectively becoming 70mm offset at that point). Hope that can help to shed some light on it!
Can you explain the mix of width and ETs on the rear? Are spacers needed only on one side?
@Eferrari34 Thank you for reaching out! Both front wheels are 8.5 x 19" et56 and are genuine.
Please confirm the other front right wheel information (size, genuine, etc). Same info you listed with the others. Thanks
@R3VMATCH ok, thank you
@Abuong01 Unfortunately, I do not have the center caps.
Do you have the RUF center caps
Good afternoon everyone! Happy to be here to sell my set of RUF wheels and to find them a good home at no reserve! If anyone has any questions, please feel free to reach out and I’d be happy to help answer them to the best of my ability. Happy bidding!