No Reserve Large Illuminated Porsche Style Sign
Item Details
- Seller: Hasanak
- Location: Tyre, Lebanon
- Lot #: M-0038845
Available for auction is a large illuminated Porsche style sign. The seller states the sign is in perfect working condition, and each letter measures approximately 22” in length, 12” in height, and 3 ½” in width. Each letter is encased in a stainless-steel frame with stainless-steel enclosures on the rear, translucent red panels in plexiglass on the front, and internal LED illumination from a 220V European circuitry.
The sign features the iconic red Porsche dealership lettering of the 2000’s era, and, when spaced correctly, measures about 16 feet in length. Additionally, the seller states that it will be carefully packed in a wooden crate for shipment. The buyer is responsible for shipping, shipping insurance, handling, and transactional fees.
Auction Results
- Sold for: $1,500
- Auction End: Jan 15, 2024 08:49:15PM UTC
- Number of Bids: 22
Comments (36)
Sold for $1,500
Congratulations for the winner, and thanks for all bidders
it's yours
Bid in the amount of $1,500
Bid in the amount of $1,300
Bid in the amount of $1,200
Bid in the amount of $1,100
Bid in the amount of $1,000
Bid in the amount of $800
Bid in the amount of $750
Bid in the amount of $700
Bid in the amount of $650
Bid in the amount of $550
Bid in the amount of $500
Bid in the amount of $450
Bid in the amount of $400
Bid in the amount of $350
Bid in the amount of $325
Bid in the amount of $300
@grandwazoo Hi, $500 approx.
How much to ship to Colorado, 80512?
Bid in the amount of $275
Bid in the amount of $250
Bid in the amount of $225
Bid in the amount of $200
Bid in the amount of $125
@Noahjohn Hi $500
Shipping quote to Florida USA? Approx.
Bid in the amount of $100
@Cherche-pepite You are welcome. Here is way https://youtube.com/shorts/GxrEQzcFt5E?si=VuS6XAx9otx_R1l3
Thanks once again for your quick response.
Not being an electrician, I'm still not sure about how I'd go about installing the letters in such a way that the wires were invisible.
@Cherche-pepite How does one go about wiring all the letters together and does that mean that the wiring will be visible once the letters are wall mounted? (Each letter can be connected to the same wire cable which is connected to the power converter, and in this case the wires will be visible. Or you can connect small power converter individually to each letter then to the power outlet, and the wires will be hidden) There is many ways to do it.
Was the sign (the letters) originally intended to be floor-mounted? (It was intended to be wall-mounted)
Are these letters from a Porsche dealership?(No)
Thanks for your quick response.
How does one go about wiring all the letters together and does that mean that the wiring will be visible once the letters are wall mounted?
Was the sign (the letters) originally intended to be floor-mounted?
Are these letters from a Porsche dealership?
@Cherche-pepite Hi, there is a 220v power converter that will come with the sign, you will wire all the letters together and then connect them to it.
The light inside is led.
Letters can be mounted on wall, each letter is made of two part, the front face cover and the back part, you can take out the back part of the letter by unscrewing the screws and make a hole in it to be mount in the wall and then put back the front cover. ( I can do it also before sending the sign)
Could you clarify how all the letters get wired - and illuminated - together? Is there a single transformer that lights all the letters and, if so, what is it's voltage (110 or 220)?
The lighting is incandescent, fluorescent . . . ?
Am I correct in that there are no holes in the back such that the letters can be wall-mounted?
Hi, I need to clear one thing, the back of the letter is also steel not gypsum board as mentioned above.
Good luck to all bidders.