DT: 2004 Porsche 996 GT3 Cup
Vehicle Details
- Year: 2004
- Make: Porsche
- Model: 911 GT3 Cup
- VIN: WP0ZZZ99Z4S698028
- Mileage Shown: 22,000km
- Transmission: Manual
- Title Status: Bill of Sale
- Color: White
- Seller Type: Private Party
- Location: Holmdel, NJ 07733
- Lot #: V-0046427-DT
Based on its roadgoing counterpart with a 3.6-liter Mezger flat-six engine, the Porsche 996 GT3 Cup is a purpose-built factory race car developed for the Porsche Supercup series. The updated 996.2 version was introduced in 2002 featuring improved aerodynamics, cooling, and weight savings along with a more powerful engine rated at 375 HP. This 2004 example was reportedly raced in Europe before being acquired by the current owner in 2016 and is now being offered for auction with approximately 22k kilometers showing on the odometer.
This GT3 is finished in White and features a front bumper with a splitter and upper cooling vents, side skirts, aerodynamic racing mirrors, and a fixed rear wing. Other equipment includes lightweight Lexan windows, rear window bars, hood and decklid pins, an emergency cutoff switch, a front tow strap, a rear tow hook, yellow-tinted headlamps, dual center-mounted tailpipes, red brake calipers, and center-lock 18” BBS racing wheels. The seller indicates the Pirelli tires that are currently mounted have 3 heat cycles, and two extra sets of wheels are included with additional racing slicks and rain tires. A small damage is also said to have been sustained to the left rear quarter during a club racing event in 2023.
The lightweight racing interior includes a full roll cage and a Recaro racing bucket seats with a Schroth safety harness and window net. Other accessories include a three-spoke MOMO steering wheel, a fire suppression system, a cool suit system, a lap timer, and a digital MoTeC data display with GPS finish line detection.
The naturally aspirated 3.6-liter Mezger flat-six engine was rated at 380 HP and 280 lb.-ft of torque. A 6-speed manual transmission sends power to the rear wheels and the braking system includes fixed 6-piston front calipers paired with 350mm cross-drilled discs. The car is also equipped with adjustable suspension components and motorsport-tuned ABS. The seller indicates the car has been professionally maintained with services after each race.
This sale will include additional wheels, owner’s manuals, and a bill of sale.
The seller would like you to know: “The car is available for inspection, there are a couple of professional places near Holmdel, New Jersey. Please let us know if there are any questions you have, thank you.”
Comments (45)
Additional content has been added to the gallery for this listing.
Anyone is welcomed to look at the car in my house then you decide where to have it verified.
Thank you for the recommendation
@Agent99 If you're truly interested in this cup car I would do as seller (is this you Jose?) suggests - call and talk with Peter (Dawes.) I'm sure Peter (he's a good guy and reputable) will provide his accurate assessment of the car which was maintained and race supported (I presume) by his shop. That would spare you the expense of having a shop like Speedwerk travel down to south Jersey to pick up the car and go through it at their shop in Nyack.
So that Speedwerks can inspect it.
You can pick up the the car and be responsible for the transport so Speedway can inspect it.
@Agent99 Speedwerks-NY is a Rockland County (NY) shop, which is next door to Bergen County, NJ. They know cup cars and currently service 3 (at least) that run in PCA club racing this season.
Speedwerks is located in Nyack, NY (at 14 New Street).
Peter Dawes shop is in East Straudsburg Pa 1.5 hours from my house
Have not used them (yet!) - who has been doing your maintenance locally? I just don t know a bergen county shop that knows cup cars
Dawes motorsport will give you a fare unbiased opinion.
Who would you suggest for the inspection?
Thank you all for your effort on this BID, Cup Car is still available for inspection
Bid in the amount of $47,000
Bid in the amount of $45,000
this is dirt cheap somebody grab it . I wonder what the reserve is? These cars are sooooo underated it will beat anyyy street car on the track and those cars3-10x as much. Plus a race factory-built car with factory engineered cage
Bid in the amount of $42,500
Usually I use my Gopro front and rear
Does it have functional front and rear facing cameras included per PCA requirements?
Sorry No wand, Jacks work without leak
Do air jacks work without any leaks? Does a wand come with the car?
Thanks
not a street car
58 Hours on the motor
forged wheels
2700LBS
rear bumper was damaged, we continued finished the race with a respectable result
Cup car is well taken care of but not garage queen
Just seeking a few facts: curb weight, estimated total track hours in 20 years, are the wheels forged, how many track accidents where towed off track, can I assume this cannot be driven on US streets?
Thanks I know cages changed over the 996 Cup run just wasn’t sure which years had changes.
Bid in the amount of $40,000
I meant the (CAGE).
The cafe has not been modified.
Remains as it was . When I bought
Has cage been modified? I don’t see the door cage cross bad center plate on passenger side and not sure what is under the yellow piece in same position on drivers side door cross bars.
Thanks
Bid in the amount of $36,000
Bid in the amount of $35,000
Bid in the amount of $33,000
Bid in the amount of $32,000
Bid in the amount of $9,962
58 hours
how many hours rec'd for an engine rebuild?
standard, Easy to change to larger size, seat is good until 2028
Is the Recaro seat the XL or standard size?
Engine build hours are 58HRS.
Transmission 30 HRS
Bladder 3 years
@manorii is that 50 hours on both engine and transmission? Both rebuilt at the same time previously?
@siliev1991 30Hrs. on the transmission
58 Hrs. on engine
@uscarrera 58 Hrs. since last build
@uscarrera 3 years on the bladder
@siliev1991 50
Bid in the amount of $2,500
Can you share age of fuel cell bladder?
Thanks
@siliev1991 *since* last rebuild..
How many hours on engine and transmission some last rebuild?