The C6-generation Chevrolet Corvette Z06 was launched for the 2006 model year and equipped with a new 7.0-liter V8 LS7 engine, the largest-displacement small block engine ever produced. This 2007 example comes finished in Velocity Yellow and features over $65k worth of upgrades installed under the current ownership including a Stage 4 supercharger performance package from JTM Motorsports. Said to produce 930 HP at the rear wheels, this Corvette Z06 is now being offered for auction by its owner out of New York while showing under 6k miles on the odometer.
The Z06 is distinguished from the standard C6 Corvette by wider carbon fiber front fenders, wider fiberglass rear fenders, functional brake cooling ducts, an intake scoop on the front bumper, and a larger rear spoiler and front splitter. This 2007 example is finished in Velocity Yellow with a layer of clear paint protection film over the full exterior. It rides on aftermarket 17” Weld Racing wheels including beadlock rear wheels with new Mickey Thompson GT Street R tires mounted within the last 300 miles. Detailed images are provided in the gallery along with a clean CARFAX report.
Inside, this Z06 features a black leather interior with a 6-way power driver’s seat and a tilting leather-wrapped steering wheel. Accessories include dual-zone electronic A/C, a head-up display, keyless access with a pushbutton start, heated power mirrors, an electronic rear window defogger, cruise control, leather seating surfaces, and an AM/FM stereo. The seller notes the tire pressure warning light is present as a result of the aftermarket rims.
Rated at 505 HP stock, the 7.0-liter V8 LS7 engine drives the rear wheels by way of a 6-speed manual transmission with a limited-slip differential and 3.42 rear axle ratio. Standard performance features include the Active Handling system, traction control, speed-sensitive power steering, a transmission cooler, and stiffer shocks, springs, and sway bars compared to a standard Corvette. This Z06 has been modified with JTM Motorsport’s Stage 4 performance package including a Vortech centrifugal supercharger and an intercooler as well as an upgraded fuel system, cooling system, exhaust, a new engine block, and reinforced engine internals. The transmission was also upgraded with a heavy-duty triple-plate clutch. The seller states the car is currently tuned for 930 HP at the rear wheels and can be easily tuned for more power if the next owner desires.
This sale will include owner’s manuals, build records, and a clean title.
The seller would like you to know: “This is a mint 2007 Z06 that was taken to one of the best shops on Long Island for a $65,000 list of upgrades to include new rims, tires, motor, clutch, radiator, supercharger, block and much more to make it a heavy-duty dependable machine. Build sheet paperwork is all available and no expense was spared. Wrapped and fresh ready to go. Just too much for a 63-year-old.”
Comments (37)
Chris you stole this thing. My wifi went down. Anyway, I’m still running my twin turbo 650 hp 911 . This car it’s pretty and super fast. Both JPM and LME were extremely helpful so feel free to give them a call. Christmas in October for you, enjoy.
Sold for $40,000
Bid in the amount of $40,000
Bid in the amount of $37,500
Bid in the amount of $37,000
Bid in the amount of $32,000
Bid in the amount of $31,500
Bid in the amount of $31,000
Bid in the amount of $25,500
Bid in the amount of $25,250
Bid in the amount of $25,000
Bid in the amount of $21,250
Bid in the amount of $21,000
Bid in the amount of $19,911
Ok, Indpoke with JTM, here are a few notes. If you are going to drive it hard only run e85. If you are going to run 91 or 93 he recommends adding methanol injection. The car has a flexible fuel sensor but he says he prefers to be safe rather than sorry. He asked me how I was going to use it and I said as toy car but I like to go triple digits every so often. I asked him if he would have any reservations driving the car across country and he said no. When I told him I live in Houston he said that LME (late model engines) build the motor and as the owner stated here it’s pretty stout, this engine can handle 1500 horsepower. I’m into Porsches but this car seems extremely sweet. GLWTS
Bid in the amount of $17,000
JTM is located in Deer Park , ask for John or z Phil the owners . Stage 4 build .
Seller where is JTM Motorsports located at. I would like to talk to them, I’m definitely interested in this car. Thanks Luis in Texas.
Bid in the amount of $13,000
Bid in the amount of $7,500
Bid in the amount of $2,000
The car has been dyno tested showing 930 hp to the rear wheels and has according to the builder a very conservative tune . Car runs best on E85 but has the capability to use pump gas as well but not recommended for racing . The car has been tested and was brought back once only for a belt to get tightened which is normal as they stretch. Car has never been to the track and I have burned a few tanks of fuel since the build . Starts right up and is easy to drive . Ice cold AC and everything works . The only display warning is the tire pressure because the old tire pressure monitors weren’t compatible with the new Weld brand rims and drag radials .
Beautiful car, what is the horsepower rating on pump 93 octane? Was that test drive on e85 or 93 octane? Do you feel only being completed 2/3 months the car has been shaken down enough? Sometimes these performance builds have bugs to work out. Any engine codes or lights? Thank you for your time. GLWA.
The build was completed about two months ago and has only logged a few hundred miles . Car was purchased for $47k and had additional 65 k added . The car is very user friendly with an easy clutch . I can text you or email you some paperwork tonight or you can also speak to John the owner at JTM motor sports .
When was the build completed? Can you upload the build records to the auction gallery?
Thank you.
@VeloVolante yes
do you have original wheels?
E85 for racing and can take super unleaded for regular driving
What fuel is this tuned for.
@Chriscorv58 Yes , I can , can you give me your email address ?
Can you please provide invoices for the work completed at JTM.
@Yags She hasn’t been to the track but the builder says it could get into the eights if you hook it . Fir an old guy like me low 10’s beats my hellcat buddy’s .
What 0-60 and qtr mile times does this beast make! This is the ultimate drag ready Z06!
@Joeyravioli427. Monster series clutch
@Alpinist , I can find out for you , give me a little time . Car was recently built by JTM motor sports .
I'm on my second two plate clutch, so who is the manufacturer of your three plate?
I have a same year/model making 666 hp naturally aspirated that I track regularly, but at 72 years of age it would appear I'm ineligible to bid on this one.😉 Seriously, nice ride!