Vehicle Details
- Year: 2005
- Make: Porsche
- Model: 911 Carrera S
- VIN: WP0ZZZ99Z5S698046
- Mileage Shown: 10,000
- Transmission: Manual
- Title status: Clear
- Seller: Kchally
- Seller Type: Private Party
- Location: Hudson Valley, NY
- Lot #: V-0001613
Up for auction is this authentic 2005 996 GT3 factory Cup Car. Having been originally used by the Brazil GT3 Cup Challenge division, this 996 was driven in a few races before being exported to Miami in 2012. Purchased not too long after by the current owner, this GT3 has seen limited use at DE events while being carefully maintained using only genuine parts. Showing approximately 16,000km (10k miles) on the odometer, this number’s matching GT3 Cup Car is now being offered for auction in ready-to-race condition by its seller in New York.
Showing to be in excellent shape for a veteran race car, this 996 is said to have undergone a respray some years back to correct typical track going wear. The car is said to remain fully intact and structurally sound. Exterior features include removable racing graphics as well as original BBS Cup wheels which have been rebuilt and come wrapped in Pirelli tires with five heat cycles. The sale will also include two additional sets of Pirelli Tires (one set with 2 heat cycles and another set with three heat cycles). A true piece of racing heritage, this GT3 looks the part.
This 996 GT3 is equipped with an all-business lightweight racing interior that has been outfitted with all necessary safety equipment. Since acquiring the car, the owner has installed a new steering wheel and footrest plate as well as new OMP race seat with Schroth safety belts. Providing the driver with only the most essential controls, this no-frills interior retains full functionality of all gauges, electrical components and accessories.
This GT3 is equipped with a numbers-matching 3.6 L flat-six engine that is rated at approximately 370 HP. The rear wheels are driven by way of a 6-speed manual transmission which is mated to a brand-new GT Pro limited slip differential. Showing 0 engine hours since its last complete service completed by Advanced Automotive, the seller has indicated that this GT3 runs beautifully at this time with no issues whatsoever. The ECU values along with all replacement parts have been documented and outlined in the following lists.
Engine Hours
- ECU Engine Operating hours when purchased: 4
- ECU Engine Operating hours last service: 33
- ECU Engine max Operating speed: 8205 RPM
- 0 hours on recent complete service
Parts Installed Since Current Owner’s Purchase
- Water Outlet Neck O-Rings With Dust Protection (Both Sides)
- Cooling System Ventilation Tube
- Belt Pulley
- Belt
- Steering Rack
- Power Steering Reservoir Support Bracket
- Power Steering Vent Hose
- Power Steering Cap Sealing Ring
- Roof Frame Sealing
- Steering Wheel
- Spoiler Edge
- Axels (Black Turbo)
- Front Rotors
- Brake Pads (Front/Rear)
- Plate For Footrest
- Rubber Boot (Fuel Neck)
- Fuel Cap
- Front Wheel House Protectors (Front/Both)
- Under Body Panel (Left Side)
- Starter
- Ignition Switch
- Main Relay
- Additional Brake Light Assembly
- OMP Racing Seat
- Safety Belts (Schroth)
Brand-New Parts (0 hours of use)
- GT Pro Limited Slip Differential
- Roller Bearings
- Shaft Sealing Rings
- Adjustment Rings
- Starter Ring Gear
- Flywheel
- Clutch
- Pressure Plate
- Release Bearing
- Release Fork w/ Bushings
- Guiding Tube
- Joint Bushings
- Release Shaft
Rebuilt Parts
- Air Jacks
- Sachs Front Struts
- BBS Cup Wheels
The sale of this track-ready GT3 Cup Car will include all service and race tools, the factory manual, one key, extensive maintenance records and the EPA certificate approving this car for racing in the U.S. Offered with a clean bill of health and a clear title in hand, this Cup Car stands ready for its next owner. Whether you’re a driver looking to take your skills to the next level or a collector in search of the ultimate piece of racing memorabilia, this GT3 will make a great addition to your collection.
Add Auction to Calendar
Auction Results
- Highest Bid: $64,000
- Auction End: Dec 16, 2019 08:44:46PM UTC
- Number of Bids: 20
Comments (37)
F1yerger.....I think you would’ve gotten this if you had just bid $64, 996 ?
Bid in the amount of $64,000
Bid in the amount of $63,000
Bid in the amount of $61,996
Bid in the amount of $59,996
Bid in the amount of $59,000
Bid in the amount of $57,996
Bid in the amount of $57,000
Bid in the amount of $55,000
Bid in the amount of $51,000
Bid in the amount of $49,500
Bid in the amount of $48,000
Bid in the amount of $46,000
Bid in the amount of $45,000
Would love to see this car out there in PCA with us this year! Looks a beaut.
Bid in the amount of $43,996
Bid in the amount of $40,996
good luck to your sale OP and congrats to the lucky new owner it'll be a fun track toy!
IF anyone is interested I took this Video this Cup Car a few years ago and put it on Youtube being moved from Front of Advanced Auto to inside. Tom owner of Advanced was the guy warming car up and then moving it.
Check it out and turn up your speakers and bass.
https://youtu.be/Cqh2DDoIIjE
@TheBaron Car has one fiberglass door (right side). Other door is carbon.
@burnrubr this is a factory built racecar. Has an EPA import certification. Cannot be register for street use.
@JPD 8205
@JPD max rpm recorded?
@Kchally thx
what's the current weight of the car? can it be registered and street driven?
Question to seller...... Are the doors the OE Porsche Cup doors where are they aftermarket replacement, ie; Getty Design, etc?
@JPD No pins.
Coolant elbows on 996 are already metal not plastic.
No log book.
No data logger (only ECU data installed at factory)
No service records: Before this batch of 996's were sent to Miami a disgruntled employee took all the records. However, if you look at the 997's that came over after the 996's from the same series the cars were maintained very well.
Steel fenders.
Right rear fender/quarter repaired.
@JPD No fuel cell
2019 on Belts and Fire bottle. Fire bottle can be re-certified.
Bid in the amount of $35,996
Bid in the amount of $35,000
Expiry dates on
Fuel cell
Fire system
Seat Belts
Harness
Bid in the amount of $12,996
Great questions… Was wondering the exact same thing......
JPD 6 hours, 40 minutesago
have the coolant tubes been pinned? photos/document?
have the plastic coolant elbows to oil cooler been replaced? photos/document?
is there a racing log book?
Was engine a rebuild or refresh at the zero hours before the export from Brazil? Any service records that support the Brazil engine work?
history on transmission, last rebuild/ refresh? Any records?
is there a data logger system?
are the front fenders steel or fiberglass on this unit?
any tub damage history?
Bid in the amount of $9,996
have the coolant tubes been pinned? photos/document?
have the plastic coolant elbows to oil cooler been replaced? photos/document?
is there a racing log book?
Was engine a rebuild or refresh at the zero hours before the export from Brazil? Any service records that support the Brazil engine work?
history on transmission, last rebuild/ refresh? Any records?
is there a data logger system?
are the front fenders steel or fiberglass on this unit?
any tub damage history?
I have seen this cup car in person on the lift and on the ground and it is beautiful in all respects livery on it is beautiful as well and the sound of that motor it's just glorious even at idle.
Bid in the amount of $996