Vehicle Details
- Year: 1974
- Make: Porsche
- Model: 911 Modified
- VIN: 9114102872
- Mileage Shown: 96mi (TMU)
- Transmission: Manual
- Title Status: Clean
- Color: White
- Seller: Speedster57
- Seller Type: Private Party
- Location: Oceanside, CA 92054
- Lot #: V-0023933
This 1974 Porsche 911 Coupe underwent custom restoration under prior ownership including widened RS/IROC-style bodywork, a new interior, and an upgraded 2.7-liter engine. Said to have been driven less than 200 miles since, this 911 is now being offered for auction by its seller out of California.
This 911 has been fitted with wide fiberglass fender flares along with an IROC-style front bumper, RS-style ducktail rear spoiler, and modern projector headlights. The car is said to have been recently refinished in the current shade of White and rides on a set of upgraded 17” Fuchs wheels dressed in Toyo Proxes tires. Additional images are provided in the gallery.
The grey interior has been redone and customized with a pair of two-tone Porsche 997 power seats and matching RS-style door panels. The rear seats have been replaced with storage compartments and custom white instrument dials have been installed along with a three-spoke MOMO steering wheel, Kenwood radio, drilled aluminum pedal covers, and a billet shift knob. The seller reports all gauges and accessories to be fully functional.
Power comes from an air-cooled 2.7-liter flat-six engine that is said to have been custom-built to RS specifications under prior ownership. The rear wheels are driven by way of a 5-speed 915 manual gearbox with a new clutch and short shift kit. Other upgrades include PMO carburetors, Elephant Racing oil lines, a front-mounted oil cooler, and red-painted Porsche Boxster brakes with new floating rotors.
This sale will include a clean title.
Auction Results
- Highest Bid: $35,000
- Auction End: Nov 16, 2022 09:01:48PM UTC
- Number of Bids: 7
Comments (52)
I had the same questions as others. Underbody images (the 74 is not galvanized). Detailed engine build sheet. Detailed suspension build sheet. Without these could not bid.
@Speedster57 I'm new to these auctions, was the reserve met? If not, what is the procedure here?
@CBRacerX What would you like to know and I’ll try to answer your questions
@eurocol Sorry you’re disappointed but I went to see him yesterday and my mechanic said he looked at it Saturday so my hands were tied
@CBRacerX I apologize what are you a question about the IRS I’ll try to answer immediately sorry about the mixup
Bid in the amount of $35,000
Seller isn't helping out here.
@NineThirty I’m getting that corrected Saturday thanks for your reply
@Speedster57 Auction ends in an hour 43 minutes??
How will getting the info in 3 days on Saturday help??
I asked you over 2 days ago for the information,
and still no underbody pictures.???
Please go out to the garage and get the info......
@Speedster57 Will have an answer late Saturday about the hood alignment it will be corrected thanks for the input
@eurocol I’ll get those numbers for you Saturday also I’m going to align the hood also to be correct you’ll have an answer Saturday afternoon thank you for your input
@eurocol I love your answer for the
@bents No it doesn’t thanks for your input
@robertschachtesq Everything’s lined correctly it’s your imagination it handles quite well
Does the car have AC?
Is it my imagination or do the front wheels look misaligned with the wheel arches?
@Speedster57 doesn't help at all, engine number is important to see what case was used etc.
also are there receipts for the build that you mention, please post pictures of these receipts and who did the work.What about the underbody pictures??
@Speedster57 That would have made a lot more sense.
@NineThirty That’s correct I don’t know why they didn’t shut it before they put the brace on thanks for your concern
@Speedster57 Why is the smugglers box open? Is it only because the strut brace is preventing it from closing?
@FLATSIX911 It’s a great car I’m just getting older and it’s time to sell thank you for your response
@eurocol I don’t have that handy I know though Andrew is completely rebuilt four years ago two RS specs I know the numbers would be different I hope that helps thanks for your input
@FLATSIX911 It’s a great car and fun to drive around town and on the track it sounds wonderful I think you would love it
@NineThirty I’m having my mechanic look at that tomorrow and correct that problem it’s one that I forgot about it just has to adjust it or align it but it will be done thank you for your call I appreciat
@Speedster57
you have several unanswered questions,
can you please give answers,
many thanks,
Bid in the amount of $30,000
@Speedster57 Nice car. Is the frunk open in the pictures? Pictures 13 30 and 31 it appears to be way out of alignment. Do you have any undercarriage pictures?
Thanks
Bid in the amount of $24,911
Sweet car,
could you please post a picture of the engine number,
thnx
@Speedster57 Hi, can we get a driving video please?
Thanks.
Bid in the amount of $15,500
Bid in the amount of $15,000
Bid in the amount of $1,200
Bid in the amount of $911
@CLEARWATERMS thanks for your concerns about my car there is no rust whatsoever the engine is up to specs for a 2.7 RS unfortunately I don’t have any paperwork on that when I got the car it was in a crate wrapped up I just believe the mechanic that it was completely redone the suspension the best of my knowledge is set up for racing again the mechanic took all that information on the car and took off to Florida I wish I could help you more on those specs but the car runs like a dream and it is fast and it has less than 200 miles on it there is a photo of the gas tank which is brand new I hope this helps you with some of your questions keep in touch
floating rotors are more commonly called 2 piece rotors. Race car stuff, the hub and braking surface are seperate pieces and the rotor "ring" can be replaced seperate from the hub. Because the hub section can be made of a lighter metal they reduce unsprung mass and allow for better thermal management. The Boxster brake calipers are fixed position calipers.
I have a few questions; What is done to the motor? It doesn't appear to twin plug so i'm guessing its not high compression, does it have stock cams, is it still 2.7 liters of displacement? What is the exhaust configuration? It appears to have heat tins on the top so i'm assuming they are not headers
How is the suspension setup?
Is there any rust? Can we get some photos of the front of the trunk around the gas tank and some underbody photos as well?
@SkyPilot The back should 245s the funds are 225
@550bryan learn something every day, I knew about floating calipers but I have never had a car with floating rotors.
@Speedster57 No Worry and Thanks!! Can you post the Tire sizes Front and Rear?? That's would be a great bit of Data!!
@SkyPilot The mechanic that worked on my car took off and went to Florida with a lot of my paperwork with him so I can’t really help you like I said the wheels I got from Canada and they’re beautiful
@Speedster57 Hey Speedster57,
Oh, I am a stinker for getting ideas from others work and no better place than this Porsche!!
HELP ME!!!
@Speedster57 Hey Speedster57,
Got it and Thanks!! So, I am in the process of building a very similar Porsche. I went to Luft 8 In LA last month to get some ideas on the build. The scenery was off the charts.. The problem was, everyone was off looking around at all the other Porsche's!! Based on that, I didn't get much information!! I would like to duplicate the exact wheels you have on this build!! That said, can you share with us what the mechanics name is and what shop he is at!! You guys in CA have numerous resources to lean on!! Some good hard data would be appreciated!! I am sure there are others who would like to know as well!!
Thanks and Cheers,
SkyPilot
@SkyPilot Did you get my reply
@550bryan You don’t float caliper
@Lottacars The car has been completely restored in the last four years the engine and body was four years ago the mechanic is now in Florida who did the work on it he left California two years ago he left without telling me and took most of the receipts with him if you need to I can try to find where he’s at and give you his phone number thanks for your reply
@SkyPilot I just went to a Porsche mechanic and he told me there was spacers front and back like I said those rims were from Canada and they do look beautiful I hope I answered all your questions
@Ranger3 It was never a sunroof sorry I thought it was
Great looking tribute, but for better braking performance I hope it has floating calipers, not floating rotors. GLWTS
To seller: how long have you owned it? When was body and engine work done and by what company? Can you post invoices for the work?
Was this a factory sunroof delete car or is it a patch job?
Thanks
Hey Speedster57,
The wheels on this Porsche are simple awesome! Can you please share the manufacture along with the widths (front and rear) to include the offsets and backspacing? Again, they look great on this white Porsche!!! A posting of the invoice with that information would be GREAT!! I'll be watching this one like a hawk!!
Can we assume there are no spacers on either the front or the rear axles?? Agree as noted "Love this"!!
Thanks,
SkyPilot
Love this!